Main function of any steam trap is to trap the steam and drain out the condensate water. In industry there are many types of steam trap like thermodynamic trap, float trap & inverted bucket trap. There is huge difference in working principle of our RECTUS Steam trap and other ordinary steam trap.
There are mainly three problems in other mechanical operating traps are as under so preventive testing and maintenance required.
Traps fail in open condition :
Traps fail in closed condition so backing up condensate causing:
Working Principle
Steam is approximately 1000 times greater in volume than condensate at atmospheric pressure and as steam and condensate pass through the orifice of the trap. But in density wise condensate is much greater than steam so only condensate water come first than steam come out due to specifically sized venture orifice design.
It is important to know that acceptable loss from 50 RECTUS venturi orifice steam traps is LESS than that of 1 failed open mechanical type steam trap.
The RECTUS unit is sized to handle 100% of the condensate load produced by a particular application.
At 100% capacity, an accurately sized orifice loses no steam and backs up no condensate.
When the load drops below 100% capacity, the orifice passes a violently turbulent mixture of equivalent volumes of steam and water. Since condensate is several hundred times denser than steam, steam loss is negligible.
Model | RECTUS 0.5,0.75,1.0,1.5,2.0 |
Size | S/E 1/2",3/4",1",3/2",2" |
Brand | Innovative Enerpro |
Material | Body SG Iron/ Internal part SS316 |
Color | BLACK |
Condition | New |
Country of Origin | Made in India |
Main function of any steam trap is to trap the steam and drain out the condensate water. In industry there are many types of steam trap like thermodynamic steam trap, float steam trap, inverted bucket steam trap & Venturi Orifice steam trap. There is huge difference in working principle of Venturi float Steam trap and other regular steam trap.
There are mainly two problems in other regular mechanical operating steam traps are as under so preventive testing and maintenance required frequently.
1. Steam traps fail in open condition ( Occur mostly in TD steam trap):
2. Steam traps fail in closed condition so backing up condensate causing (Occur mostly in Float and Bucket steam trap):
Note : In float steam trap there are permanent steam loss through SLR.
All these problems are eliminated in Venturi Float Steam trap due to there are Ventury and float two orifice are in working.
In Venturi float Steam Trap there are two orifice working to remove condensate from Steam System. One is Venturi orifice which is design as per client condensate load and pressure at inlet of trap and second is float valve orifice. Ventury orifice nozzle is sized to handle 100% of the condensate load produced by a particular application. Normally ventury orifice is in working condition. Float orifice is in closed condition. Some time at starting of process and low pressure condition there are float orifice is open and remove excess water from system. So this Venturi Float steam trap can cope up efficiently the condensate load at start up, normal running and pick load condition.
DESIGN FEATURES
Two orifice mechanism control condensate flow at all levels
Tailor made Venturi orifice design control condensate flow automatically
Continuous discharge of condensate
Efficient condensate discharges due to 0.001 kg/cm2 differential pressure against 0.1 kg/cm2 of other make trap
Built in air vent for quick start up
Wear resistance construction as SG iron cover and base & stainless steel internals part
Advantages and Benefits
No SLR so no steam wastage due to miss setting of SLR
Moving parts is rarely work and so no required maintenance for long time
Permanently eliminate the need of steam trap survey and repairing cost
CO2 emissions are reduced through reducing steam consumption and boiler fuel usage.
Environment Friendly
Save water and water treatment chemicals
Permanent steam savings about 10 to 45%
Increased heat transfer typically 10%
Unaffected by thermal shock or water hammer so increasing plant life.
Model | Steam Traps |
Size | S/E 1/2,3/4,1,3/2,2 |
Brand | IEPL |
Material | Body SG Iron/ Internal part SS316 |
Color | Black |
Country of Origin | Made in India |
Main function of any steam trap is to trap the steam and drain out the condensate water. In industry there are many types of steam trap like thermodynamic steam trap, float steam trap, inverted bucket steam trap & Venturi Orifice steam trap. There is huge difference in working principle of Venturi float Steam trap and other regular steam trap.
There are mainly two problems in other regular mechanical operating steam traps are as under so preventive testing and maintenance required frequently.
1. Steam traps fail in open condition ( Occur mostly in TD steam trap):
2. Steam traps fail in closed condition so backing up condensate causing (Occur mostly in Float and Bucket steam trap)
Note : In float steam trap there are permanent steam loss through SLR.
All these problems are eliminated in Venturi Float Steam trap due to there are Ventury and float two orifice are in working.
In Venturi float Steam Trap there are two orifice working to remove condensate from Steam System. One is Venturi orifice which is design as per client condensate load and pressure at inlet of trap and second is float valve orifice. Ventury orifice nozzle is sized to handle 100% of the condensate load produced by a particular application. Normally ventury orifice is in working condition. Float orifice is in closed condition. Some time at starting of process and low pressure condition there are float orifice is open and remove excess water from system. So this Venturi Float steam trap can cope up efficiently the condensate load at start up, normal running and pick load condition.
DESIGN FEATURES
Two orifice mechanism control condensate flow at all levels
Tailor made Venturi orifice design control condensate flow automatically
Continuous discharge of condensate
Efficient condensate discharges due to 0.001 kg/cm2 differential pressure against 0.1 kg/cm2 of other make trap
Built in air vent for quick start up
Wear resistance construction as SG iron cover and base & stainless steel internals part
Advantages and Benefits
No SLR so no steam wastage due to miss setting of SLR
Moving parts is rarely work and so no required maintenance for long time
Permanently eliminate the need of steam trap survey and repairing cost
CO2 emissions are reduced through reducing steam consumption and boiler fuel usage.
Environment Friendly
Save water and water treatment chemicals
Permanent steam savings about 10 to 45%
Increased heat transfer typically 10%
Unaffected by thermal shock or water hammer so increasing plant life.
Model | RECTUS 0.5,0.75,1.0,1.5,2.0 |
Size | S/E 1/2,3/4,1,3/2,2 |
Brand | IEPL |
Material | Body SG Iron/ Internal part SS316 |
Color | Black |
Country of Origin | Made in India |
Main function of any steam trap is to trap the steam and drain out the condensate water. In industry there are many types of steam trap like thermodynamic steam trap, float steam trap, inverted bucket steam trap & Venturi Orifice steam trap. There is huge difference in working principle of Venturi float Steam trap and other regular steam trap.
There are mainly two problems in other regular mechanical operating steam traps are as under so preventive testing and maintenance required frequently.
1. Steam traps fail in open condition ( Occur mostly in TD steam trap):
2. Steam traps fail in closed condition so backing up condensate causing (Occur mostly in Float and Bucket steam trap):
Note : In float steam trap there are permanent steam loss through SLR.
All these problems are eliminated in Venturi Float Steam trap due to there are Ventury and float two orifice are in working.
In Venturi float Steam Trap there are two orifice working to remove condensate from Steam System. One is Venturi orifice which is design as per client condensate load and pressure at inlet of trap and second is float valve orifice. Ventury orifice nozzle is sized to handle 100% of the condensate load produced by a particular application. Normally ventury orifice is in working condition. Float orifice is in closed condition. Some time at starting of process and low pressure condition there are float orifice is open and remove excess water from system. So this Venturi Float steam trap can cope up efficiently the condensate load at start up, normal running and pick load condition.
DESIGN FEATURES
• Two orifice mechanism control condensate flow at all levels
• Tailor made Venturi orifice design control condensate flow automatically
• Continuous discharge of condensate
• Efficient condensate discharges due to 0.001 kg/cm2 differential pressure against 0.1 kg/cm2 of other make trap
• Built in air vent for quick start up
• Wear resistance construction as SG iron cover and base & stainless steel internals part
Advantages and Benefits
• No SLR so no steam wastage due to miss setting of SLR
• Moving parts is rarely work and so no required maintenance for long time
• Permanently eliminate the need of steam trap survey and repairing cost
• CO2 emissions are reduced through reducing steam consumption and boiler fuel usage.
• Environment Friendly
• Save water and water treatment chemicals
• Permanent steam savings about 10 to 45%
• Increased heat transfer typically 10%
• Unaffected by thermal shock or water hammer so increasing plant life.
*Your information is safe with us.
Minimum Order Quantity | 1 Piece |
Model Name/Number | IEPL |
Size | 1/2" & 1" & 3/4" & 1.5" & 2" |
Brand | IEPL |
Material | CAST IRON OR STAINLESS STEEL |
Color | SILVER OR BLACK |
I Deal In | New Only |
Main function of any steam trap is to trap the steam and drain out the condensate water. In industry there are many types of steam trap like thermodynamic steam trap, float steam trap, inverted bucket steam trap & Venturi Orifice steam trap. There is huge difference in working principle of Venturi float Steam trap and other regular steam trap.
There are mainly two problems in other regular mechanical operating steam traps are as under so preventive testing and maintenance required frequently.
1. Steam traps fail in open condition ( Occur mostly in TD steam trap):
2. Steam traps fail in closed condition so backing up condensate causing (Occur mostly in Float and Bucket steam trap):
Note : In float steam trap there are permanent steam loss through SLR.
All these problems are eliminated in Venturi Float Steam trap due to there are Ventury and float two orifice are in working.
In Venturi float Steam Trap there are two orifice working to remove condensate from Steam System. One is Venturi orifice which is design as per client condensate load and pressure at inlet of trap and second is float valve orifice. Ventury orifice nozzle is sized to handle 100% of the condensate load produced by a particular application. Normally ventury orifice is in working condition. Float orifice is in closed condition. Some time at starting of process and low pressure condition there are float orifice is open and remove excess water from system. So this Venturi Float steam trap can cope up efficiently the condensate load at start up, normal running and pick load condition.
DESIGN FEATURES
• Two orifice mechanism control condensate flow at all levels
• Tailor made Venturi orifice design control condensate flow automatically
• Continuous discharge of condensate
• Efficient condensate discharges due to 0.001 kg/cm2 differential pressure against 0.1 kg/cm2 of other make trap
• Built in air vent for quick start up
• Wear resistance construction as SG iron cover and base & stainless steel internals part
Advantages and Benefits
• No SLR so no steam wastage due to miss setting of SLR
• Moving parts is rarely work and so no required maintenance for long time
• Permanently eliminate the need of steam trap survey and repairing cost
• CO2 emissions are reduced through reducing steam consumption and boiler fuel usage.
• Environment Friendly
• Save water and water treatment chemicals
• Permanent steam savings about 10 to 45%
• Increased heat transfer typically 10%
• Unaffected by thermal shock or water hammer so increasing plant life.
Model | RECTUS 0.5,0.75,1.0,1.5,2.0 |
Size | S/E 1/2,3/4,1,3/2,2 |
Brand | IEPL |
Material | Body SG Iron/ Internal part SS316 |
Color | Black |
Country of Origin | Made in India |
Main function of any steam trap is to trap the steam and drain out the condensate water. In industry there are many types of steam trap like thermodynamic steam trap, float steam trap, inverted bucket steam trap & Venturi Orifice steam trap. There is huge difference in working principle of Venturi float Steam trap and other regular steam trap.
There are mainly two problems in other regular mechanical operating steam traps are as under so preventive testing and maintenance required frequently.
1. Steam traps fail in open condition ( Occur mostly in TD steam trap):
2. Steam traps fail in closed condition so backing up condensate causing (Occur mostly in Float and Bucket steam trap):
Note : In float steam trap there are permanent steam loss through SLR.
All these problems are eliminated in Venturi Float Steam trap due to there are Ventury and float two orifice are in working.
In Venturi float Steam Trap there are two orifice working to remove condensate from Steam System. One is Venturi orifice which is design as per client condensate load and pressure at inlet of trap and second is float valve orifice. Ventury orifice nozzle is sized to handle 100% of the condensate load produced by a particular application. Normally ventury orifice is in working condition. Float orifice is in closed condition. Some time at starting of process and low pressure condition there are float orifice is open and remove excess water from system. So this Venturi Float steam trap can cope up efficiently the condensate load at start up, normal running and pick load condition.
DESIGN FEATURES
• Two orifice mechanism control condensate flow at all levels
• Tailor made Venturi orifice design control condensate flow automatically
• Continuous discharge of condensate
• Efficient condensate discharges due to 0.001 kg/cm2 differential pressure against 0.1 kg/cm2 of other make trap
• Built in air vent for quick start up
• Wear resistance construction as SG iron cover and base & stainless steel internals part
Advantages and Benefits
• No SLR so no steam wastage due to miss setting of SLR
• Moving parts is rarely work and so no required maintenance for long time
• Permanently eliminate the need of steam trap survey and repairing cost
• CO2 emissions are reduced through reducing steam consumption and boiler fuel usage.
• Environment Friendly
• Save water and water treatment chemicals
• Permanent steam savings about 10 to 45%
• Increased heat transfer typically 10%
• Unaffected by thermal shock or water hammer so increasing plant life.
Minimum Order Quantity | 1 Piece |
Model | RECTUS 0.5,0.75,1.0,1.5,2.0, STEAM TRAP |
Size | S/E 1/2,3/4,1,3/2,2 |
Brand | Innovative Enerpro Pvt Ltd. |
Material | Body SG Iron/ Internal part SS316 |
Pressure | As per Requirement |
Usage/Application | drain |
Country of Origin | Made in India |
Main function of any steam trap is to trap the steam and drain out the condensate water. In industry there are many types of steam trap like thermodynamic steam trap, float steam trap, inverted bucket steam trap & Venturi Orifice steam trap. There is huge difference in working principle of Venturi float Steam trap and other regular steam trap.
There are mainly two problems in other regular mechanical operating steam traps are as under so preventive testing and maintenance required frequently.
1. Steam traps fail in open condition ( Occur mostly in TD steam trap):
2. Steam traps fail in closed condition so backing up condensate causing (Occur mostly in Float and Bucket steam trap):
Note : In float steam trap there are permanent steam loss through SLR.
All these problems are eliminated in Venturi Float Steam trap due to there are Ventury and float two orifice are in working.
In Venturi float Steam Trap there are two orifice working to remove condensate from Steam System. One is Venturi orifice which is design as per client condensate load and pressure at inlet of trap and second is float valve orifice. Ventury orifice nozzle is sized to handle 100% of the condensate load produced by a particular application. Normally ventury orifice is in working condition. Float orifice is in closed condition. Some time at starting of process and low pressure condition there are float orifice is open and remove excess water from system. So this Venturi Float steam trap can cope up efficiently the condensate load at start up, normal running and pick load condition.
DESIGN FEATURES
• Two orifice mechanism control condensate flow at all levels
• Tailor made Venturi orifice design control condensate flow automatically
• Continuous discharge of condensate
• Efficient condensate discharges due to 0.001 kg/cm2 differential pressure against 0.1 kg/cm2 of other make trap
• Built in air vent for quick start up
• Wear resistance construction as SG iron cover and base & stainless steel internals part
Advantages and Benefits
• No SLR so no steam wastage due to miss setting of SLR
• Moving parts is rarely work and so no required maintenance for long time
• Permanently eliminate the need of steam trap survey and repairing cost
• CO2 emissions are reduced through reducing steam consumption and boiler fuel usage.
• Environment Friendly
• Save water and water treatment chemicals
• Permanent steam savings about 10 to 45%
• Increased heat transfer typically 10%
• Unaffected by thermal shock or water hammer so increasing plant life.
*Your information is safe with us.
Model | RECTUS 0.5,0.75,1.0,1.5,2.0 |
Size | S/E 1/2,3/4,1,3/2,2 |
Brand | Innovative Enerpro Pvt Ltd. |
Material | Body SG Iron/ Internal part SS316 |
Color | Black |
Country of Origin | Made in India |
Main function of any steam trap is to trap the steam and drain out the condensate water. In industry there are many types of steam trap like thermodynamic steam trap, float steam trap, inverted bucket steam trap & Venturi Orifice steam trap. There is huge difference in working principle of Venturi float Steam trap and other regular steam trap.
There are mainly two problems in other regular mechanical operating steam traps are as under so preventive testing and maintenance required frequently.
1. Steam traps fail in open condition ( Occur mostly in TD steam trap):
2. Steam traps fail in closed condition so backing up condensate causing (Occur mostly in Float and Bucket steam trap):
Note : In float steam trap there are permanent steam loss through SLR.
All these problems are eliminated in Venturi Float Steam trap due to there are Ventury and float two orifice are in working.
In Venturi float Steam Trap there are two orifice working to remove condensate from Steam System. One is Venturi orifice which is design as per client condensate load and pressure at inlet of trap and second is float valve orifice. Ventury orifice nozzle is sized to handle 100% of the condensate load produced by a particular application. Normally ventury orifice is in working condition. Float orifice is in closed condition. Some time at starting of process and low pressure condition there are float orifice is open and remove excess water from system. So this Venturi Float steam trap can cope up efficiently the condensate load at start up, normal running and pick load condition.
DESIGN FEATURES
Two orifice mechanism control condensate flow at all levels
Tailor made Venturi orifice design control condensate flow automatically
Continuous discharge of condensate
Efficient condensate discharges due to 0.001 kg/cm2 differential pressure against 0.1 kg/cm2 of other make trap
Built in air vent for quick start up
Wear resistance construction as SG iron cover and base & stainless steel internals part
Advantages and Benefits
No SLR so no steam wastage due to miss setting of SLR
Moving parts is rarely work and so no required maintenance for long time
Permanently eliminate the need of steam trap survey and repairing cost
CO2 emissions are reduced through reducing steam consumption and boiler fuel usage.
Environment Friendly
Save water and water treatment chemicals
Permanent steam savings about 10 to 45%
Increased heat transfer typically 10%
Unaffected by thermal shock or water hammer so increasing plant life.
Model | RECTUS 0.5,0.75,1.0,1.5,2.0 |
Size | S/E 1/2,3/4,1,3/2,2 |
Brand | Innovative Enerpro Pvt Ltd. |
Material | Body SG Iron/ Internal part SS316 |
Color | Black |
Country of Origin | Made in India |
Main function of any steam trap is to trap the steam and drain out the condensate water. In industry there are many types of steam trap like thermodynamic steam trap, float steam trap, inverted bucket steam trap & Venturi Orifice steam trap. There is huge difference in working principle of Venturi float Steam trap and other regular steam trap.
There are mainly two problems in other regular mechanical operating steam traps are as under so preventive testing and maintenance required frequently.
1. Steam traps fail in open condition ( Occur mostly in TD steam trap):
2. Steam traps fail in closed condition so backing up condensate causing (Occur mostly in Float and Bucket steam trap):
Note : In float steam trap there are permanent steam loss through SLR.
All these problems are eliminated in Venturi Float Steam trap due to there are Ventury and float two orifice are in working.
In Venturi float Steam Trap there are two orifice working to remove condensate from Steam System. One is Venturi orifice which is design as per client condensate load and pressure at inlet of trap and second is float valve orifice. Ventury orifice nozzle is sized to handle 100% of the condensate load produced by a particular application. Normally ventury orifice is in working condition. Float orifice is in closed condition. Some time at starting of process and low pressure condition there are float orifice is open and remove excess water from system. So this Venturi Float steam trap can cope up efficiently the condensate load at start up, normal running and pick load condition.
DESIGN FEATURES
• Two orifice mechanism control condensate flow at all levels
• Tailor made Venturi orifice design control condensate flow automatically
• Continuous discharge of condensate
• Efficient condensate discharges due to 0.001 kg/cm2 differential pressure against 0.1 kg/cm2 of other make trap
• Built in air vent for quick start up
• Wear resistance construction as SG iron cover and base & stainless steel internals part
Advantages and Benefits
• No SLR so no steam wastage due to miss setting of SLR
• Moving parts is rarely work and so no required maintenance for long time
• Permanently eliminate the need of steam trap survey and repairing cost
• CO2 emissions are reduced through reducing steam consumption and boiler fuel usage.
• Environment Friendly
• Save water and water treatment chemicals
• Permanent steam savings about 10 to 45%
• Increased heat transfer typically 10%
• Unaffected by thermal shock or water hammer so increasing plant life.
Minimum Order Quantity | 1 Piece |
Model Name/Number | CAST IRON |
Size | 1/2" & 1" & 3/4" & 1.5" & 2" |
Brand | IEPL |
Usage/Application | A steam trap is a device used to discharge condensates and non-condensable gases with a negligible c |
Material | SS OR CI |
Color | SILVER OR BLACK |
I Deal In | New Only |
Main function of any steam trap is to trap the steam and drain out the condensate water. In industry there are many types of steam trap like thermodynamic steam trap, float steam trap, inverted bucket steam trap & Venturi Orifice steam trap. There is huge difference in working principle of Venturi float Steam trap and other regular steam trap.
There are mainly two problems in other regular mechanical operating steam traps are as under so preventive testing and maintenance required frequently.
1. Steam traps fail in open condition ( Occur mostly in TD steam trap):
2. Steam traps fail in closed condition so backing up condensate causing (Occur mostly in Float and Bucket steam trap):
Note : In float steam trap there are permanent steam loss through SLR.
All these problems are eliminated in Venturi Float Steam trap due to there are Ventury and float two orifice are in working.
In Venturi float Steam Trap there are two orifice working to remove condensate from Steam System. One is Venturi orifice which is design as per client condensate load and pressure at inlet of trap and second is float valve orifice. Ventury orifice nozzle is sized to handle 100% of the condensate load produced by a particular application. Normally ventury orifice is in working condition. Float orifice is in closed condition. Some time at starting of process and low pressure condition there are float orifice is open and remove excess water from system. So this Venturi Float steam trap can cope up efficiently the condensate load at start up, normal running and pick load condition.
DESIGN FEATURES
• Two orifice mechanism control condensate flow at all levels
• Tailor made Venturi orifice design control condensate flow automatically
• Continuous discharge of condensate
• Efficient condensate discharges due to 0.001 kg/cm2 differential pressure against 0.1 kg/cm2 of other make trap
• Built in air vent for quick start up
• Wear resistance construction as SG iron cover and base & stainless steel internals part
Advantages and Benefits
• No SLR so no steam wastage due to miss setting of SLR
• Moving parts is rarely work and so no required maintenance for long time
• Permanently eliminate the need of steam trap survey and repairing cost
• CO2 emissions are reduced through reducing steam consumption and boiler fuel usage.
• Environment Friendly
• Save water and water treatment chemicals
• Permanent steam savings about 10 to 45%
• Increased heat transfer typically 10%
• Unaffected by thermal shock or water hammer so increasing plant life.
*Your information is safe with us.
Model | RECTUS 0.5,0.75,1.0,1.5,2.0 |
Size | S/E 1/2,3/4,1,3/2,2 |
Brand | Innovative Enerpro Pvt Ltd. |
Material | Body SG Iron/ Internal part SS316 |
Color | BLACK |
Country of Origin | Made in India |
Main function of any steam trap is to trap the steam and drain out the condensate water. In industry there are many types of steam trap like thermodynamic steam trap, float steam trap, inverted bucket steam trap & Venturi Orifice steam trap. There is huge difference in working principle of Venturi float Steam trap and other regular steam trap.
There are mainly two problems in other regular mechanical operating steam traps are as under so preventive testing and maintenance required frequently.
1. Steam traps fail in open condition ( Occur mostly in TD steam trap):
2. Steam traps fail in closed condition so backing up condensate causing (Occur mostly in Float and Bucket steam trap):
Note : In float steam trap there are permanent steam loss through SLR.
All these problems are eliminated in Venturi Float Steam trap due to there are Ventury and float two orifice are in working.
In Venturi float Steam Trap there are two orifice working to remove condensate from Steam System. One is Venturi orifice which is design as per client condensate load and pressure at inlet of trap and second is float valve orifice. Ventury orifice nozzle is sized to handle 100% of the condensate load produced by a particular application. Normally ventury orifice is in working condition. Float orifice is in closed condition. Some time at starting of process and low pressure condition there are float orifice is open and remove excess water from system. So this Venturi Float steam trap can cope up efficiently the condensate load at start up, normal running and pick load condition.
DESIGN FEATURES
• Two orifice mechanism control condensate flow at all levels
• Tailor made Venturi orifice design control condensate flow automatically
• Continuous discharge of condensate
• Efficient condensate discharges due to 0.001 kg/cm2 differential pressure against 0.1 kg/cm2 of other make trap
• Built in air vent for quick start up
• Wear resistance construction as SG iron cover and base & stainless steel internals part
Advantages and Benefits
• No SLR so no steam wastage due to miss setting of SLR
• Moving parts is rarely work and so no required maintenance for long time
• Permanently eliminate the need of steam trap survey and repairing cost
• CO2 emissions are reduced through reducing steam consumption and boiler fuel usage.
• Environment Friendly
• Save water and water treatment chemicals
• Permanent steam savings about 10 to 45%
• Increased heat transfer typically 10%
• Unaffected by thermal shock or water hammer so increasing plant life.
Minimum Order Quantity | 1 Piece |
Model Name/Number | IEPL VF |
Size | 1/2" & 3/4" & 1" & 3/2" & 2" |
Brand | IEPL |
Material | Stainless Steel |
Color | Silver |
Max Operating Temperature | 100 C |
Temperature | 80-100 |
Usage/Application | Steam |
I Deal In | New Only |
Class Rating | 5 |
Corrosion Resistance | Yes |
IEPL Steam Traps come standard with our 10 year performance guarantee against orifice erosion and steam wastage .
See below the smooth steam flow in IEPL Steam trap compare to other mechanical steam trap.
Due to the traps unique orifice design there is TRUE continuous condensate discharge without any open/close cycles rather than intermittent discharge unlike traditional mechanical type steam traps.
It is important to know that acceptable loss from 50 Rectus steam traps is LESS than that of 1 failed open mechanical type steam trap. And CO2emissions are reduced through reducing steam consumption and boiler fuel usage by up to 20%.
Benefits
Minimum Order Quantity | 1 Piece |
Model Name/Number | Iepl Steam Trap |
Size | 1/2", 1", 1.5" |
Brand | IEPL |
Material | Cast Iron |
Color | Black |
Available Design | Ball Float |
Country of Origin | Made in India |
See below the smooth steam flow in RECTUS Steam trap compare to other mechanical steam trap.
Due to the traps unique orifice design there is TRUE continuous condensate discharge without any open/close cycles rather than intermittent discharge unlike traditional mechanical type steam traps.
*Your information is safe with us.
Model Name/Number | STEAM TRAP, RECTUS 0.5,0.75,1.0,1.5,2.0 |
Size | S/E 1/2,3/4,1,3/2,2 |
Brand | Innovative Enerpro Pvt Ltd |
Material | Body SG Iron/ Internal part SS316 |
Country of Origin | Made in India |
Main function of any steam trap is to trap the steam and drain out the condensate water. In industry there are many types of steam trap like thermodynamic steam trap, float steam trap, inverted bucket steam trap & Venturi Orifice steam trap. There is huge difference in working principle of Venturi float Steam trap and other regular steam trap.
There are mainly two problems in other regular mechanical operating steam traps are as under so preventive testing and maintenance required frequently.
1. Steam traps fail in open condition ( Occur mostly in TD steam trap):
2. Steam traps fail in closed condition so backing up condensate causing (Occur mostly in Float and Bucket steam trap):
Note : In float steam trap there are permanent steam loss through SLR.
All these problems are eliminated in Venturi Float Steam trap due to there are Ventury and float two orifice are in working.
In Venturi float Steam Trap there are two orifice working to remove condensate from Steam System. One is Venturi orifice which is design as per client condensate load and pressure at inlet of trap and second is float valve orifice. Ventury orifice nozzle is sized to handle 100% of the condensate load produced by a particular application. Normally ventury orifice is in working condition. Float orifice is in closed condition. Some time at starting of process and low pressure condition there are float orifice is open and remove excess water from system. So this Venturi Float steam trap can cope up efficiently the condensate load at start up, normal running and pick load condition.
DESIGN FEATURES
• Two orifice mechanism control condensate flow at all levels
• Tailor made Venturi orifice design control condensate flow automatically
• Continuous discharge of condensate
• Efficient condensate discharges due to 0.001 kg/cm2 differential pressure against 0.1 kg/cm2 of other make trap
• Built in air vent for quick start up
• Wear resistance construction as SG iron cover and base & stainless steel internals part
Advantages and Benefits
• No SLR so no steam wastage due to miss setting of SLR
• Moving parts is rarely work and so no required maintenance for long time
• Permanently eliminate the need of steam trap survey and repairing cost
• CO2 emissions are reduced through reducing steam consumption and boiler fuel usage.
• Environment Friendly
• Save water and water treatment chemicals
• Permanent steam savings about 10 to 45%
• Increased heat transfer typically 10%
• Unaffected by thermal shock or water hammer so increasing plant life.